Sign In | Join Free | My fazendomedia.com
China Hubei EverFLON Polymer Co.,Ltd logo
Hubei EverFLON Polymer Co.,Ltd
Polymer of Dreams
Active Member

7 Years

Home > Application Box >

Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware

Hubei EverFLON Polymer Co.,Ltd

Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware

Brand Name : TechYours

Model Number : 16700

Certification : RoHS,SGS,FDA

Place of Origin : China

MOQ : 500kg

Packaging Details : 30kg in drum

Raw Material : PTFE

Type : Water Base

Color : Customerize

Supply Ability : 50 Ton/Tons per Month

Application Method : Spray

State : Liquid Coating

Contact Now

PTFE Non Stick Coating / Three-Layer Spray / Water Base Non-Stick Coatings



Brief Introduction


Techyours® is designed with two-layer coating system. Thanks to its high density, good inadhesion, easy-to-clean performance and strong practicability. It is applicable for substrates like aluminum, alloy and stainless steel etc.

It is white two-layer fluororesin non-stick coating. Superior initial non-stick property, easy to clean. It’s ideal for internal coating and external coating of frying pan, stock pot, baking tray, electric fry pan and inner pot of electric cooker etc.


Type of PTFE Coating


Water Base


Main Features of PTFE Coating


l Eco-friendly

l Excellent heat resistant

l Excellent chemical resistance and abrasive resistance

l Excellent and lasting non-stick performance, easy to clean


Data List of Techyour PTFE Coating


ITEM 16700
Appearance Black liquid
Solid content (%) 35±1
Viscosity (cp)

600~1000 Primer

400~800 Top

Density (g/ml) 1.20 Primer/1.30 Top
pH 8-11(Primer and top)
Color of the film surface 8-11(Primer and top)
Curing temperature () 380-420
Gloss (60° glossimeter) 10-20
Film thickness (μm) 20-30

Non-stick performance Fry eggs at 170±10

>10 cycles

Corrosion resistance Boling 10% salt water for 24 hours

No blister
Abrasion resistance 3KG/21cm2 >3000 cycles
Hardness (ZHONGHUA pencil) >H


Main Processing Way of Techyour PTFE Coating


Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware

1. Requirement on pre-treatment

l Firstly, apply high-temperature degreasing, then wash with 1%~3% NaOH solution (60) for more than 6 minutes, dry it after water rinsing;

l Blast with 80#~120# corundum to make the surface roughness reach 2.0μ~3.0μ, pay attention to sandblast evenly;

l Wash with 1%~3% NaOH solution(60) for more than 6 minutes, rinse with water;

l Wash with 1%~3% hydrochloric acid solution (60) for more than 6 minutes, rinse with water and dry.

2. Preparation of the coating

l Dispersion of coating: the coating must be fully dispersed before operation;

l Viscosity adjustment: the viscosity could be adjusted according to different spray methods. Dilute with clean water if the viscosity is over high;

l Coating filtration: filtrate the coating with screen (100mesh) before using.

3. Application

l The spraying environment should be dry, well-ventilated, no smoking and fire. We suggest using dedicated spray gun, elevated tank and curing oven;

l The air compressor should be degreased, dewatered and equipped with water oil separator before using;

l Roll the coating at 30rpm speed before using to make sure there is no sediment, and filter with 100 mesh screen;

l Adjust atomization and oil pump capacity of the spraying gun; make sure the unit is clean and flat;

l Preheat the substrate to 35 and spray the primer. Dry it at temperature of 120~150 for 10min-15min. Keep the thickness of primer within 12μm-18μm;

l Spray top coating after the primer is dry and cooling to room temperature, then spray the top. Dry the unit at the temperature of 100~150 for 10~20 min, and gradually increase the temperature to 380~420. Keep for 10 min. Keep the thickness of top coat within 10μm~12μm. The thickness of two coat tally should be between 20μm~30μm;

l The oven (or the tunnel drier) must be well ventilated; otherwise, it will lead to color change of coating.


Main Application of Techyour PTFE Coating


Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware


Package&Delivery


Techyours® PTFE non-stock coating must be stored under frost proof environment under optimum 18-26℃ temperature;

It should be homogenized once or twice a month by gentle rolling or stirring when storing or before using,90min per time.


Techyours® PTFE non-stock coating is package in 25L PE drum with 25kg(55lb) content.

Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware


Product Tags:

water based teflon coating

      

ptfe liquid coating

      
Best Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware wholesale

Two Layer Fluororesin PTFE Coating White Liquid For Non Stick Cookware Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Hubei EverFLON Polymer Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)